Продукти за 12v dc мотор (21)

Product information "DT50 Medical" Characteristics DT50 Medical: universal input 100 to 240 V AC, constant voltage, current limited, green LED indicator, leakage current ≤ 10 μA, continuously short circuit proof, 2 x MOPP. •5V 5000mA up to 24V, 2200mA •Current: 5000 mA •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage tolerance: +2% / -2% •Frequency: 50 / 60 Hz •AC Input: 2 pole, IEC60320-C8 socket •Humidity: 5% to 95% •Working temperature: 0°C - 40°C •Storage temperature : -40°C - 70°C •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Standard: IEC60601-1 •DC output: Universal output plug system •Input tolerance: ±10% •Input voltage: 100-240 V •Protection Class: II •Spec.0 cover sheet FW-Type: FW7405M/05 •color: black Type:AC/DC Output:single-output Other characteristics:adapter,benchtop,for medical applications,for medical applications

ALIMENTATION ETANCHE 60W / 12V - ALIMENTATIONS

Kanteneinstrahlungsmodul | IP65 | 5 Jahre Garantie LED-Modulkette (30 Module/Kette, 60 Module/VPE), Module mit je 1 weißen LED mit Linse (Abstrahlwinkel: 56°x12°) auf Aluminium-Platine, Lichtfarbe: 6500-7000°K, Helligkeit: 158 Lm/Modul, Nennstrom/Modul: 150 mA, Verbrauch/Modul: 1,8W, Eingangsspannung: 12 V/DC, Modulabstand: 160 mm, Maße: 43x36x14,8mm, IP65 - nach jedem Modul teilbar - 5 Jahre Garantie Lichtfarben:: 6500-7000°K / 2700-3200°K Anwendungsbereiche:: Kanteneinstrahlungen / doppelseitige Leuchtkästen Zargentiefe:: > 12 cm Weitere Ausführungen:: auf Anfrage

24VDC / 5VDC 10A

Ultra-Low Standby Power High Efficiency up to 85% Smallest design (Ø 53mm) Worldwide applicable, AC/DC wide range input Reduced Inrush current Connect more devices to one automatic circuit breaker Long Hold-Up time EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25°C ... +70°C) Optional, on request: Customized cable length or mains cable Optional, on request: Output power: 20Watts and more Optional, on request: Combined variant with connector and cable Optional, on request: Customized output voltages Optional, on request: Current regulated version for LED application

Gleichspannungswandler Typ 412-3.3 || Eingangsspannungsbereich von 9V bis 36V | Ausgangsspannung: 3.3V | Ausgangsleistung: 9W | Für Umgebungstemperaturen bis +75°C | Kein Leistungsderating

Our power supply provides provides 3A for the whole range of current. This guarantees reliable work of device with different length of wiring. Two channels allows separate power providing for the electromagnet lock and for the intercom or camera. Input voltage:110-220V Output voltage:12-24V Minimum current:3A Overall dimension:111/80/35 mm Weight:0,35kg

Otomobillerin, otobüslerin, kamyonetlerin, traktörlerin, motorsikletlerin ve yatların 12 V akülerinin şarj edilmesinde kullanılabilen, sınıfının en kolay kullanımlı, portatif ve ergonomik manuel akü şarj redresörüdür.

12 Vdc 240 Vac in custodia • Potenza: 1W • Tensione di uscita: 12 V • Corrente nominale: 100 mA • Ingresso nominale: 240 Vac • Intervallo di frequenze: 50-60 HZ • Temperatura di esercizio: 60 °C • Custodia: UL94 V2

Light source for your lighting projects Discover our 30W white LED generator with several possible color temperatures to illuminate your starry skies or lighting projects. This generator is equipped with a COB LED and generates a light output two and a half times that obtained with a 100W halogen generator with color temperature and equivalent color rendering index. Its light intensity can be adjusted using a built-in potentiometer. It can also be controlled remotely with a 0 - 10V signal. Features of LED 30W white generator The 30W LED Generator is available in several color temperature and IRC versions:- 2700K, 2780lm for IRC90 / 3000K, 2890lm for IRC90 / 3000K, 2710lm for IRC97- 3500K, 2990lm for IRC90 / 4000K, 3000lm for IRC90 / 5000K, 3970 lm for IRC70 For more details on our generator, consult our technical sheet:

LKP series is a standard level snap in type aluminum electrolyte capacitor that matches following SPEC. 1. LKP standard snap in type aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 2. Size can be customized according to your design. 3. The terminal type is varied from pins to soldering lug according to your design. 4. OEM/ODM is welcomed, can be customized according to your requirement. Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. Place of Origin:Guangdong, China (Mainland) Brand Name:Liron Model Number:LKP2G471MS045K Type:Snap in Aluminum Electrolytic Capacitor, snap in aluminum electrolyte capacitor Application:General Purpose Package Type:Carton Rated Voltage:400V Operating Temperature:-40~85℃ Product name:snap in type aluminum electrolyte capacitor Capacitance:470μF Load life:2000 hours Size:35*45mm, or as customized ODM service；larger capacitance, bigger size, larger working voltage Rated voltage range:10V～250V | 315V～500V Capacitance tolerance:±20%（20℃，120Hz） Leakage current:1≤0.01CV（μA）or 1.5mA(Whichever is smaller){20℃，after 5 minutes} C=Nominal capacitance (μF) Standard:JIS C 5101-4 Operating Temperature range:-40℃～+85℃ | -25℃～+85℃

2.0mm, tin plating, black color

The PK16™ capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filters; with its high energy density it can replace banks of series-connected electrolytic capacitors as well as large film capacitors in rectangular cases. The capacitance in a DC buffer circuit must be sufficiently sized to both handle and smoothen the occurring ripple currents. The traditional use of series-/parallel-connected electrolytic capacitors offered large capacitance at seemingly low cost, however the low cost per microfarad is countered by the very low current strengh, the high sensitivity to voltage and current surges, as well as a substantial risk of failures in the field, resulting in high maintenance cost. Our advanced know-how in special capacitor film coating and many years of practical experience in designing and manufacturing capacitors have allowed us to develop our PK16™ range with high capacitance density.

Piles et accus - Pile sèche type 800 - 6V - 7-9 Ah

Bautiefen: 80 - 200 mm | IP65 | 5 Jahre Garantie LED-Modulkette (40 Module/Kette, 80 Module/VPE) mit je 3 kaltweißen LEDs mit Linse (Abstrahlwinkel 160°) auf Aluminium-Platine, Helligkeit: 125 Lm/Modul, Leistung: 1,2W/Modul, Lichtfarbe: 6000-6500 °K, Modulmaße: 68x16x6,4mm, Modulabstand: 200 mm, Eingangsspannung: 12V/DC, IP65 max. 40 Module in Reihenschaltung 5 Jahre Garantie Lichtfarbe:: 6.000-6.500°K Bautiefen:: 80 - 200 mm Anwendungsbereiche:: Hinterleuchtung / einseitige Leuchtkästen + Schriftzüge

Gleichspannungswandler-344-24-SD || Eingangsspannungsbereich von 22V bis 160V | Ausgangsspannung: 24V | Ausgangsleistung: 50W | Für Umgebungstemperaturen bis +85°C | Kein Leistungsderating

Merkmale FOX30-X: Übertrifft die Anforderungen gemäß DOE 2016, hoher Wirkungsgrad, minimale Standby-Verlustleistung ≤ 0,1 Watt, weltweiter Einsatz durch austauschbare Primärleitung, doppelte Sicherheit: Geschnappt und verschweisst. Zusatzinformationen •Farbe: Schwarz •Standard: IEC60950-1 •Eingangsspannung: 100-240 V •Länderversion: FRIWO interchangeable mains plug system: see Primary Adapters •Schutzklasse: II •Eingangstoleranz: ±10% •DC Ausgang: Universalausgangssteckersystem •Lagertemperatur: -40°C - 70°C •Arbeitstemperatur: 0°C - 45°C •Luftfeuchtigkeit: 10% bis 95% •AC Eingang: FRIWO interchangeable mains plug system: see Primary Adapters •Frequenz: 50 / 60 •Ausgangsspannungstoleranz: ± 5% •Eingangsstrom: 600-300 mA •Ableitstrom: ≤10 µA •Überlastsicherung: Ja •Überspannungschutz: Ja •Kurzschlussschutz: Ja •Betriebshöhe: 2.000 •EMV/ EMC: EN55022, EMV55024 V •Abmessungen: 90x55x34 Typ:AC/DC Ausgang:Einfachausgang Weitere Eigenschaften:Adapter

Product information "FOX18-XM" High efficiency: up to 86.9% Low no load power consumption 50ms(230V) •material: PC-ABS •Approbations: Europe, USA, Australia, Japan •Housing Flame Class: UL 94 V0 •IP Rotection rating: IP40 •Overload protection: JA •Short Ciruit protection: JA •Over Voltage Protection: JA Type:AC/DC Output:single-output Other characteristics:adapter,for medical applications

Source de lumière pour ciels étoilés, projets d'éclairage Découvrez notre générateur LED 20W blanc avec plusieurs températures de couleur possibles pour illuminer vos ciels étoilés ou pour vos projets d'éclairage. Ce générateur est équipé d’une LED COB et génère une puissance lumineuse supérieure à celle obtenue avec un générateur halogène 100W. Son intensité lumineuse peut être ajustée à l’aide d’un potentiomètre intégré. Elle peut être aussi pilotée à distance avec un signal 0 – 10V. Caractéristiques de notre générateur LED 20W Le Générateur LED 20W est disponible en plusieurs températures de couleur avec IRC90 : - 2700K,1470lm / 3000K, 1795lm / 3500K, 1850lm - 4000K, 1850lm / 6500K, 2300 lm Il existe une version étanche de ce générateur en IP55. Pour obtenir plus de détails sur notre générateur, consultez notre fiche technique.

Source de lumière 2W pour fibres diffusantes Découvrez notre générateur LED 2W monochrome pour éclairer de manière très homogène plusieurs pinceaux finq de fibres diffusantes. Son diamètre optique admissible est de 7mm. La chaleur est dissipée par le boitier en aluminium. Son indice de protection IP44 permet une installation de la source de lumière à l'extérieur.. Caractéristiques de notre générateur LED 2W Le Générateur LED 2W est disponible en blanc chaud / blanc neutre / blanc froid mais aussi en rouge / vert / bleu. La dimension du boitier est de 80 x 50 x 30mm. Pour obtenir plus de détails sur notre générateur, consultez notre fiche technique :

Product information "FOX30-XM" High efficiency: up to 88% Low no load power consumption 50ms (230V) •Approbations: Europe, USA, Australia, Japan Type:AC/DC Output:single-output Other characteristics:adapter,safety,for medical applications,for medical applications